ShenZhen Fahold Electronic Limited
Modell: FD-100H-54C
Marke: FAHOLD
Verpakung: 20PCS / KARTON
Produktivität: 200 thousands pcs
Transport: Ocean,Air
Ort Von Zukunft: Guangdong, China
Unterstützung über: 200000pcs
Zertifikate : ISO9001
HS-Code: 8504401400
Hafen: Yantian
Zahlungsart: L/C,T/T,Paypal,Western Union
Incoterm: FOB
IP67
-UL und CUL für feuchte Standorte aufgelistet
-Solide Konstruktion aus Aluminiumdruckguss
Max Ausgangsleistung 160W.
Konstantes gegenwärtiges Design.
3-in-1-Dimmmodus: 0-10 V, PWM, RX.
Glatt dimmen (0-100%), kann abdunkeln.
TÜV CB CE UL FCC zertifiziert.
SCHUTZ: Kurzschluss, offener Stromkreis
Oberflächenmontage Light Driver
Anwendung
Überdachungslichter, Straßenbeleuchtungen, hohe Buchtlichter, Wand-Packlichter.
LED-Werbeschild, LED-Architekturbeleuchtung, LED-Industriebeleuchtung, LED-Allgemeinbeleuchtung, Geführte LED-Wandleuchten.
E inleitung
|
Model |
Wattage(W) |
Output volgag(V) |
output current(A) |
Efficiency(%) <at>100V |
|
FD-100H-038 /B/C/D |
100 |
24-38 |
2.30-3.30 |
90 |
|
FD-100H-042 /B/C/D |
100 |
30-42 |
1.50-3.00 |
90 |
|
FD-100H-054 /B/C/D |
100 |
36-54 |
1.80-2.40 |
91 |
|
FD-100H-076 /B/C/D |
100 |
45-76 |
1.20-1.85 |
91 |
|
FD-100H-143 /B/C/D |
100 |
72-143 |
0.50-1.30 |
92 |
Hinweis
Optionale Buchstaben A, B, C, D oder leer, um anzuzeigen, dass die Ausgabe mit verschiedenen optionalen Funktionen zunimmt. Der Standardbereich gibt keine andere optionale Funktion an (Grundmodell); Ein Buchstabe zeigt an, dass die Aluminiumschale mit Drei-in-Einem-Dimmen, B-Buchstaben, drei in einem dimmbaren Licht und Feinabstimmungsstrom, C-Buchstaben, Kunststoffschale mit drei A-Dimmung, D-Buchstaben, die Kunststoffschalenbasismodelle (Nr Dimmfunktion)
|
Input characteristics |
|||
|
Input Voltage |
100-277Vac |
||
|
Input Frequency |
50-60Hz |
||
|
Input Current (Typ.) |
2A . @ 100-277Vac , 100% load |
||
|
Inrush Current |
60Amax. @ 100-277Vac , 100% load |
||
|
Power factor(Typ.) |
PF>0.95@ 100-277Vac , 100% load |
||
|
THD |
THD<15%@ 100-277Vac , 100% load |
||
|
Output characteristics |
|||
|
Current accuracy |
5%I0 |
||
|
No load Voltage |
2Wmax |
||
|
Efficiency |
90%@ 100-277Vac & 100% load, see efficiency vs. load curve for the details |
||
|
Ripple and Noise |
800mVp-p |
||
|
Line Regulation |
3%Io |
||
|
Load Regulation |
3%Io |
||
|
Turn On Delay Time |
Under normal conditions, the maximum delay time is 2 second |
||
|
Protection functions |
|||
|
Open circuit |
When the LED disconnection the product is protected such as hiccup or when it is at the highest point of output voltage, the power supply shall be self-recovery when the fault condition is removed. |
||
|
Short Circuit |
The input power shall decrease when the output rail short, the power supply shall be self-recovery when the fault condition is removed. |
||
|
Environmental conditions |
|||
|
Operating Temperature |
-40℃ to +60℃ |
||
|
Operating Relative Humidity |
10% to 90% RH, non-condensing |
||
|
Storage Temperature |
-40℃ to +85℃ |
||
|
Storage Relative Humidity |
10% to 90%RH, non-condensing(Sea level to 2,000 m) |
||
|
Vibration |
10 to 500HZ Sweep at constant acceleration of 1.0G (depth: 3.5mm )for 1 Hour for each of the perpendicular axes X, Y, Z. |
||
|
Aluminium housing Degrees of Protection |
IP67 |
||
|
Safety compliance |
|||
|
Safety Standard |
GB19510.1,GB19510.14;EN61347-1,EN61347-2-13;UL8750, CSA C22.2No.250.13-12. |
||
|
Dielectric Strength |
P-S:3750VAC/5mA/60S P-E:1500VAC/5mA/60S P-E:500VAC/5mA/60S |
||
|
Insulation Resistance |
I/P-O/P:>50M Ohms / 500VDC / 25℃ / 70% RH. |
||
|
Leakage Current |
The leakage current shall be less than 0.25mA for Class 2 at maximum input voltage |
||
|
EMI |
GB17743,GB17625.1; EN55015, EN61000-3-2, EN61000-3-3. |
||
|
EMS |
EN 61000-4-2, 3,4,5,6,8,11, EN 61547. |
||
|
EFT |
Severity Level : Level2/2 line to line 1.0kv |
||
|
Surge Immunity |
Severity Level : Level2/2, 4.0kv Severity Level : Level3/3, 6.0kv Performance Criterion:B |
||
|
Reliability |
|||
|
Life Time |
≥5Years H@230Vac, 100% load. See lifetime vs. Tc curve for the details |
||
|
MTBF |
≥ 200,000H@ 25℃, 230Vac, 80% load. (MIL-HDBK-217F) |
||
|
Warranty |
5 years |
||
|
Others |
|||
|
Aluminium housing Dimensional |
2158X66X38.2(LxWxH) |
||
|
Aluminium housing Weight |
950±10g |
||
|
Remark |
|||
|
1. The parameters above including the power factor, THD, efficiency are all tested under the ambient temperature 25℃ and humidity 50%, AC input 230V and 90% output load. 2. Io is rate output current. |
|||
Produktgruppe : Led-Treiber für Outdoor-Liminaires > LED Canopy Light Treiber
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now